logo
Mesaj gönder

CHNSpec Technology (Zhejiang)Co.,Ltd chnspec@colorspec.cn 86--13732210605

CHNSpec Technology (Zhejiang)Co.,Ltd Şirket Profili
Haberler
Evde > Haberler >
Şirket Haberleri A Guide to Choosing Airborne Multispectral Payloads: From Specs to Practical Use, Avoiding Buying Pitfalls

A Guide to Choosing Airborne Multispectral Payloads: From Specs to Practical Use, Avoiding Buying Pitfalls

2026-11-18
Latest company news about A Guide to Choosing Airborne Multispectral Payloads: From Specs to Practical Use, Avoiding Buying Pitfalls

​ In agricultural and forestry remote sensing, ecological surveys, and field scientific research projects, drones equipped with multispectral cameras have become standard operational equipment. Many procurement staff and project leaders can easily be misled by marketing specs when choosing devices: the camera may claim to have many channels, but the images come out misaligned; the paper specs boast high pixels, but the actual flight resolution falls short; you might only realize after buying that it doesn't match your existing industrial drones; the hardware arrives but lacks the necessary processing tools, leaving raw data unusable.


This article is entirely based on real field operations and breaks down practical points for selecting airborne multispectral payloads. By referencing the actual hardware parameters of four FigSpec® multispectral cameras, it provides practical guidance for engineering projects and research topics.


I. Choose based on real operational metrics, not just the numbers in brochures


Many people initially compare the number of channels and pixels when choosing a device, but only parameters that are usable in practice are truly effective. Focus on five key indicators that directly affect results in the field.


1. Spectral band configuration: prioritize stock bands, then consider customization

The bands determine what tasks the camera can perform. In vegetation scenarios, the 720nm and 840nm dual red-edge bands are very practical. Red-edge bands are sensitive to crop nitrogen stress and early pest and disease responses. In areas with dense vegetation, they can overcome the saturation limits of standard NDVI indices.

Some devices on the market only offer basic RGB and near-infrared bands, missing the red edge, and can only perform simple land cover classification, not detailed crop health diagnostics. FigSpec® multispectral cameras come standard with 720nm and 840nm dual red-edge bands, and support customization for 19 wavelengths, covering the 400-1000nm range. If you need water quality monitoring or special land feature observation, bands can be adjusted; but for regular agri-forestry projects, it's best to use the stock bands to reduce the cost of delivery and data validation.


2. Simultaneous multi-channel imaging: staggered exposure ruins field data

This is a common pitfall. Some low-cost multispectral cameras capture channels sequentially. Drones keep moving forward even at moderate speeds, so time differences between channel captures cause misalignment in the images. Post-processing alignment can take a lot of time but often cannot fully remove errors, seriously reducing the reliability of vegetation indices and reflectance calculations.

FigSpec® multispectral cameras use simultaneous, delay-free snapshot imaging for all channels, with global shutters to prevent motion blur during flight. For models FS-500 and FS-620, the RGB channels use rolling shutters, only for visible scene imaging and not used in spectral calculations, which is a practical hardware compromise.


3. Ground Resolution (GSD): Check parameters based on your usual flight altitude.

The sensor’s pixel count is not the same as ground resolution—you must look at the GSD (ground sampling distance) for the corresponding flight altitude. Don’t be misled by the on-paper pixel count. Reference FigSpec® official measured parameters

  • FS-500/600/620: Flight altitude 120m, multispectral ground resolution 9.6cm, coverage width 123m × 98m;
  • FS-900: Flight altitude 120m ground resolution 4.5cm, at 100m altitude reaches 3.75cm, coverage width 92m × 69m.

Practical considerations:

  • For large-scale farmland surveys aiming for operational efficiency, prioritize wide coverage; models like FS-500, FS-600 with large fields of view can cover more area in a single flight;
  • For small test plots or identifying forest tree species where you need to resolve small features, prioritize the FS-900 high-GSD option—but the trade-off is more photos for the same area and larger post-processing data size.


4. Weight, Power Consumption, and Interface: Must match existing UAV hardware.

A lot of buyers overlook mounting compatibility, only to find after delivery that the device doesn’t fit or battery life drops sharply.

  • FS-500 (≤900g), FS-600 (≤940g), FS-620 (≤1000g) use X-Port interface, peak power consumption up to 43W, suitable for heavy-lift industrial drones;
  • FS-900 complete unit ≤400g, SkyPort interface, peak power ≤30W, lighter weight puts less load stress on the aircraft.

Practical reminder: Don’t just look at weight, also check interface type and platform power supply. Even if weight is okay, if the interface doesn’t match, adding third-party adapters can cause unstable power, vibration, and flight control triggering issues. FS series natively supports DJI Pilot integrated control; models like M400 are plug-and-play, support timed, overlap, and flight-control trigger modes, and up to 10Hz shooting frequency, making field adjustments simple.


5. Data Format and Supporting Software: Hardware is just the first step.

A complete multispectral workflow: flight collection → image preprocessing → reflectance correction → vegetation index calculation → thematic output. The hardware needs to output 16-bit TIFF raw files with GPS information, which is a basic requirement for research projects. FS series images all embed GPS coordinates and come standard with 128GB SD storage; matching FigSpec MS-PreMerge and FigSpec Studio software handles preprocessing and index analysis.

Practical reminder: If the manufacturer only provides the camera hardware without supporting preprocessing software, having to rely entirely on third-party commercial software will significantly increase project costs and learning curves.


II. Real-world Use Cases for the Four Major Models – Say No to Overpriced Spec


Based on actual project conditions, each of the four models has a clear positioning; it’s not always the case that "the more expensive, the better, the more suitable."

FS-500 | 4 Spectral Channels + RGB, Main Model for Engineering Projects

Hardware: 4 multispectral channels + 11.9Mpx RGB; multispectral global shutter, RGB rolling shutter; X-Port interface, total weight ≤ 900g. Suitable projects: large-field agricultural inspections, county-level vegetation surveys, land resource surveys. Real advantage: captures spectral data and high-definition color images at the same time; RGB images are used for plotting field boundaries and visually identifying land features. Wide field of view, 120m flight altitude coverage is large, making it ideal for large-scale engineering projects with controllable overall costs. Not suitable: projects requiring thermal infrared temperature data or high-resolution detailed sample plots for research.


FS-600 | 6-Channel Pure Multispectral, Recommended for Research Experiments

Hardware: 6 multispectral channels, all global shutter; sapphire optical window, X-Port interface, total weight ≤ 940g. Suitable projects: university research, agricultural experiment stations, crop stress gradient observation experiments. Compared to the 4-channel version, it adds 450nm blue and 750nm red-edge for richer spectral information. The sapphire window is scratch-resistant, suitable for fieldwork in windy, sandy, and dusty environments. Real reminder: there’s no separate RGB camera, so if color imagery is needed, an additional visible-light payload must be added.


FS-620 | 4 Spectral + RGB + Long-Wave Infrared (LWIR), Multi-Source Integrated Payload

Hardware: 4-channel multispectral + RGB + 8-14μm long-wave thermal infrared; X-Port interface, total weight ≤ 1000g. Suitable projects: drought monitoring, wetland ecological assessment, disaster emergency surveys. A single flight captures spectral, visible, and surface temperature data, avoiding multiple take-offs and saving field time. The thermal infrared channel can detect abnormal vegetation canopy temperatures for drought and pest/disease thermal signals. Real reminder: the total weight is close to 1kg, so make sure the drone’s payload capacity allows it; thermal infrared data requires a separate processing workflow, so it’s important to evaluate in advance whether temperature data is really needed. If thermal infrared isn’t required, the FS-500 is more cost-effective.


FS-900|9-Channel Lightweight High-Performance Payload

Hardware Configuration: 9-channel multispectral, all global shutter, effective pixels 3.14Mpx; SkyPort interface, total weight ≤ 400g. Suitable Projects: High-standard scientific research projects, detailed forest classification, small-area sample plot observation. The 9 bands cover blue, green, red, dual red-edge, and multiple near-infrared bands; it's lightweight, which minimally affects drone endurance, while offering high ground resolution. Reality Reminder: Compared to FS500/600, the field of view is smaller, so for large-area surveys, the number of photos will increase significantly, leading to longer post-processing time for stitching.


III. Common Pitfalls in Field Procurement (from real project feedback)


1. Blindly trusting the number of channels: More channels don’t always mean better. For large-scale agricultural surveys, 4-6 channels are usually enough; blindly opting for 9 channels results in more data, longer processing time, and unnecessary costs.

2. Ignoring shutter differences: Some models use rolling shutters for RGB, only for reference imagery and not for spectral calculations. This is a hardware trade-off; understand the limitations before fieldwork, and don’t use RGB rolling shutter as a spectral channel.

3. Only looking at specs, not GSD at flight altitude: Before purchase, ask the manufacturer for sample images at your intended flight height. Seeing the real images is more convincing than staring at a specs sheet.

4. Neglecting environmental adaptability: Field operations usually involve 0-45℃ temperature and ≤85% non-condensing humidity. Exceeding these ranges can affect imaging quality. FS-600’s sapphire window offers better scratch resistance in the field compared to ordinary glass.

5. Assuming interfaces and payloads are compatible: Don’t assume adapters will work; prioritize devices that natively match your drone’s interface. Adapters can cause vibration, unstable power supply, and other on-site issues.


IV. Conclusion


Choosing an onboard multispectral payload is essentially about matching your real project conditions: survey area size, drone payload interface, type of data needed (just spectral? RGB? thermal infrared?), and budget. High specs don’t equal high efficiency—what matters is being suitable for field conditions, having a complete hardware-software setup, and reliably producing quality results.

Olaylar
İletişim
İletişim: Mrs. CHNSpec
Faksla.: 86--13732210605
Şimdi iletişime geçin
Bize e-posta gönderin.